13 个品类，每个品类都有独立详情页Thirteen equipment families, each with its own page
从 CNG 减压撬到低温泵撬：讲清原理、结构、参数、适用工况与对比，不只是参数表。Principle, structure, data, duties and comparison for every family.
CNG 减压撬CNG pressure reducing skid
把槽车 20 MPa 的压缩天然气降到管网或直供用户所需的压力，撬上集成换热、切断、计量与安全放散，现场接管即用。Takes 20 MPa yard gas down to network or direct-user pressure, with heat exchange, shut-off, metering and relief on one skid.
CNG 储气瓶组CNG cylinder bank
按瓶位与单瓶容积组合的储气单元，用于门站调峰、充装与点供缓冲，可做固定瓶组也可做可移动集装格。Storage units sized by cylinder count and volume, fixed banks or transportable frames.
LNG 气化撬LNG vaporizing skid
500 Nm³/h 级 LNG 气化撬，空温式气化器打底、水浴式补热，调压计量与安全放散随机集成。500 Nm³/h class skid: ambient vaporizer with water-bath trim, regulation and metering integrated.
LNG 气化调压站LNG vaporizing and regulating station
从储罐、卸车增压、气化、调压、计量到 BOG 处理的整站交付，含土建接口与自控。Whole-station delivery from tank and unloading booster through vaporisation, regulation and BOG handling.
燃气调压计量撬Gas regulating and metering skid
集过滤分离、安全切断、加热、减压、计量、加臭于一体的撬装系统，用于分输站、门站与城市管网调压。Filtration, slam-shut, heating, regulation, metering and odorisation on one skid for gate and network stations.
燃气调压柜（箱）Gas regulating cabinet
把调压、切断、放散、计量装进一个箱体，落地即用，适合场地紧张的门站末端、厂区与小区。Regulation, slam-shut, relief and metering inside one cabinet for tight sites.
燃气计量撬 / CNG 减压计量撬Metering skid / CNG metering skid
以计量为核心功能的撬装单元，兼顾调压与切断，用于贸易结算、企业内部核算与过程监控。Metering-centred skid with regulation and shut-off, for custody transfer and internal accounting.
低温液体泵撬Cryogenic pump skid
把低温液体加压到充装或气化所需压力，用于充装站、气化站与工业气体工厂。Pressurises cryogenic liquid to filling or vaporisation pressure for filling plants and gas works.
空温式气化器Ambient-air vaporizer
以环境空气为热源，把液氧、液氮、液氩、LNG、CO₂ 气化到常温，免维护、零耗电。Ambient air as heat source for LO₂, LN₂, LAr, LNG and CO₂; no power, no maintenance.
水浴式气化器Water-bath vaporizer
用热水浴把低温液体加热气化，出力不随气温波动，是北方冬季与高负荷场合的补热主力。Water bath delivers stable output regardless of ambient — the winter trim heater.
氢气调压撬Hydrogen regulating skid
针对氢气低密度、易泄漏、易氢脆的特性做的三级减压撬，用于加氢站、掺氢与工业用氢。Three-stage skid built for hydrogen: low density, leak-prone, embrittling.
工业气体设备Industrial gas equipment
氧气、氮气、氩气、氢气、二氧化碳的集装、储存、配比与充装设备，按气体种类与用气曲线成套配置。Bundling, storage, mixing and filling for O₂, N₂, Ar, H₂ and CO₂.
低温卸车臂与卸车增压器Cryogenic unloading arm and booster
LNG/液氮槽车卸液的成套接口设备：卸车臂、增压器、低温软管与氮气吹扫。Complete unloading interface: arm, booster, cryogenic hose and purge.