把液化天然气，安全送到每一个用气端 Delivering LNG safely to every point of use
一条管线，撑起整个厂区的用气底气 One pipeline that carries the whole plant
10000 m² 厂房，把撬装做成标准件 10,000 m² plant turning skids into standard builds
按工况参数，把设备做成一套系统 Equipment engineered into one system, by duty parameters
从 CNG 减压、燃气调压到 LNG 气化储存，每一台撬装都按项目的流量、进出口压力与介质条件单独出图、单独验收。 From CNG pressure reduction to gas regulation and LNG vaporizing, every skid is drawn and tested against the project's flow, pressures and medium.
全系列目录Full catalogue
六个场景，一套供气逻辑 Six scenarios, one supply logic
厂区自备气站，为熔炼、热处理、烘干等连续用气设备稳定供气。Captive gas stations feeding melting, heat treatment and drying lines.
城镇独立小区、公建用户的区域供气，低噪音、无人值守运行。District supply for residential communities and public buildings, unattended.
城市门站与调峰站，用气高峰补气，双路切换不断供。City gate and peaking stations covering demand spikes without interruption.
CNG 瓶组、储罐与集装格，把气量存下来，把交期留出来。CNG banks, tanks and frames that hold gas volume and buy schedule margin.
低温液体气化充装站，氧气、氮气、氩气、二氧化碳成套配置。Cryogenic vaporizing and filling stations for O₂, N₂, Ar and CO₂.
园区与厂区集中供气，一台设备服务多台炉窑、多条产线。Park and plant-wide supply: one system serving many furnaces and lines.
十多年风雨，初心没变Fifteen years, same discipline
河北泰燃能源科技有限公司是河北省专业气体设备与燃气设备制造企业之一，位于河北省邢台市南宫经济开发区，注册资金 1000 万元。公司拥有各项生产资质 20 余项，大专以上学历 28 人、高级工程师 1 人、工程师 4 人、助理工程师 6 人。 Hebei Tairan Energy Technology Co., Ltd. is one of Hebei's specialised manufacturers of gas and gas-supply equipment, based in the Nangong Economic Development Zone of Xingtai, with RMB 10 million registered capital, 20+ manufacturing permits and a 28-strong college-educated staff including one senior engineer, four engineers and six assistant engineers.
公司外聘天津、重庆等地气体设备制造专家，并与邢台市特种设备监督检验研究所等单位联合培训机加工、特种焊工、组装调试等技术骨干，形成一支经验丰富的气体设备设计与制造团队。 Outside specialists from Tianjin and Chongqing work with the company, and technical staff are trained jointly with the Xingtai Special Equipment Inspection Institute — machining, special welding, assembly and commissioning.
实力不是形容词，是可核对的产能 Capability you can verify, not adjectives
公司实力Manufacturing base
占地 1 万平米，生产与检测设备齐全，20 多项资质在手，60 名熟练生产人员，库存与半成品备料充足，生产工序严格按产品标准执行。10,000 m² site, complete production and testing equipment, 20+ permits, 60 skilled staff, and stock held for faster delivery.
生产设备Production lines
多条燃气设备与气体设备生产线，可生产各类规格撬装，每台产品出厂前完成检测，按国家标准验收。Multiple gas-equipment lines covering all standard skid sizes, each unit tested before shipment.
高效交付Lead time
产能充足并保有现货与半成品库存，大幅压缩生产周期，按合同交期如约发货。Finished and semi-finished stock shortens production cycles; shipments follow the contracted date.
运输配送Logistics
与多家专业物流公司深度合作，可按客户要求配送到工程现场，撬装整机运输、到场即装。Partner carriers deliver skids to site, ready to install on arrival.
专业服务Service
售前技术团队现场勘察、针对性出方案；售中全程施工指导与培训；售后快速响应，保障工程按期开展。Pre-sales site survey and tailored scheme, on-site guidance during construction, fast after-sales response.
做过的项目，都留下参数 Every project leaves its numbers behind
标准在变，选型逻辑也得跟着变 Standards change; so must selection logic
七步，从参数到到场 Seven steps from parameters to site
把工况参数发过来，24 小时内回一份能对比的方案 Send us your duty data — a comparable scheme within 24 hours
介质、流量、进出口压力、现场条件，四项给全即可。我们按参数出流程图、设备清单与逐项报价。 Medium, flow, inlet/outlet pressure and site conditions are enough to start. You get a P&ID, equipment list and itemised quotation.