燃气调压计量撬Gas regulating and metering skid
集过滤分离、安全切断、加热、减压、计量、加臭于一体的撬装系统，用于分输站、门站与城市管网调压。Filtration, slam-shut, heating, regulation, metering and odorisation on one skid for gate and network stations.
产品概述Product overview
调压计量撬是把一座调压站压缩进钢底座的产品：上游来气先过滤分离，经安全切断阀、调压阀组降压，中间按需加热（防止节流降温后结露或冰堵），再进计量段与加臭段，最后送往下游。DN5000 级撬体整重约 2100 kg，环境适应 −19~60℃，进出口压差在 0.4 MPa 量级时不需要中间加热。A whole regulating station compressed onto a skid: filtration, slam-shut, regulation, optional heating, metering, odorisation. 5000 Nm³/h unit weighs about 2100 kg.
配置逻辑有两派：单路大流量和双路一开一备。工业连续生产（窑炉、玻璃、陶瓷）必须双路，因为停气一次的损失远超设备差价；用气有明确停歇时段的场合，单路加旁通也能用。泰燃默认给双路，把切换做成自动，主路故障三秒内接替。Duty/standby is default for continuous industrial loads: changeover within three seconds on a fault.
结构组成What is on the skid
核心优势Why this design
- 压差与露点先算后配：是否需要加热由计算决定，不凭经验堆设备。Heating decided by calculation, not habit.
- 双路自动切换：3 秒内接替，连续生产不停气。Changeover within 3 s.
- 计量可溯源：流量计选型与温压补偿一并出计算书。Meter sizing with compensation sheet.
- 设计寿命 20 年：耐蚀材料 + 长效防腐工艺。20-year design life.
- 智能电伴热：比常通加热省电 30% 以上。Smart trace heating saves over 30%.
技术参数Technical data
| 型号Model | RTQ5000/10-2SJRTQ5000/10-2SJ |
|---|---|
| 额定流量Flow | 5000 Nm³/h5000 Nm³/h |
| 进口压力Inlet | 0.6–0.8 MPa0.6–0.8 MPa |
| 出口压力Outlet | 0.2–0.4 MPa0.2–0.4 MPa |
| 环境温度Ambient | −19 ~ 60 ℃−19 to 60 °C |
| 整撬重量Weight | 约 2100 kg≈2100 kg |
| 调压级数Stages | 2 级（工作 + 监控）2 (working + monitor) |
| 设计寿命Design life | 20 年20 years |
表中为该系列典型配置。项目流量、介质与进出口压力不同时按工况单独设计，参数以合同技术文件为准。Typical configuration; units are engineered per duty and the contract data sheet governs.
适用工况Typical duties
同类设备Related equipment
把你的工况发过来，我们出选型表Send your duty, we return a selection sheet
需要提供：介质、最大/最小流量、进口压力、出口压力、现场热源（电/热水/蒸汽）、安装场地条件。We need medium, min/max flow, inlet and outlet pressure, available heat source and site conditions.