工业气体设备Industrial gas equipment
氧气、氮气、氩气、氢气、二氧化碳的集装、储存、配比与充装设备，按气体种类与用气曲线成套配置。Bundling, storage, mixing and filling for O₂, N₂, Ar, H₂ and CO₂.
产品概述Product overview
工业气体设备的共性是“接口多、气体杂”：同一车间可能同时用氧、氮、氩和混合气，每种气体的阀门口径、材质禁油要求、放散方式都不同。成套配置时先按气体种类分线，再按用气峰值定集装格数量，最后按纯度要求选阀与管材。Different gases need separate lines; frame count follows peak demand; valve and tube selection follows purity.
常用组合：气瓶集装格（15 MPa）+ 汇流排 + 减压阀组 + 充装排；混合气场合加二元/三元配比柜，配比精度按工艺要求定。低温液体场合则接低温储罐、低温泵与气化器。Typical sets: 15 MPa frames, manifolds, regulators and filling headers, with two- or three-gas mixing cabinets.
结构组成What is on the skid
核心优势Why this design
- 按气体分线：氧、氮、氩、氢分管分阀，避免交叉污染。Gas-specific lines avoid cross-contamination.
- 禁油与材质合规：氧气管路禁油处理，氢气管路专用材质。Oil-free oxygen lines; hydrogen-rated materials.
- 成套交付：汇流排、配比、充装一体配齐。Complete sets delivered together.
- 可扩展：预留接口，后续加气体种类不动主管。Interfaces for future gases.
技术参数Technical data
| 适用气体Gases | O₂ / N₂ / Ar / H₂ / CO₂O₂ / N₂ / Ar / H₂ / CO₂ |
|---|---|
| 集装格压力Frame pressure | 15 MPa15 MPa |
| 配比形式Mixing | 二元 / 三元混合气配比柜Two- or three-gas cabinet |
| 配套设备Included | 低温液体泵、气化器、充装排Pump, vaporizer, filling header |
| 管材Tubing | 不锈钢，氧气管路禁油处理Stainless, oil-free for O₂ |
| 定制Customisation | 按气体种类与用气曲线配置By gas type and demand curve |
表中为该系列典型配置。项目流量、介质与进出口压力不同时按工况单独设计，参数以合同技术文件为准。Typical configuration; units are engineered per duty and the contract data sheet governs.
适用工况Typical duties
同类设备Related equipment
把你的工况发过来，我们出选型表Send your duty, we return a selection sheet
需要提供：介质、最大/最小流量、进口压力、出口压力、现场热源（电/热水/蒸汽）、安装场地条件。We need medium, min/max flow, inlet and outlet pressure, available heat source and site conditions.